| Version |
Changes |
| 1.0 |
First version. |
| 1.1 |
Added option to split output
file
in to files containing no more than 30000 rows. The version number is now displayed. |
| 1.2 |
Added option to output a maximum
of one line per subframe. Changed references to fields to refer to parameters. |
| 1.3 |
Fixed problem where commas were
output instead of decimal points in some regions. This would then cause
confusion between commas used as decimal separators and commas used as
field delimiters. Added the following parameters: Raw PRES POSN LAT-LSData Raw PRES POSN LAT-MSData Raw PRES POSN LONG-LSData Raw PRES POSN LONG-MSData |
| 1.4 |
Fixed bug with negative ALTITUDE
(1013.25mB) values being decoded incorrectly. Fixed the following parameters: APU EGT CONTROL COLUMN POSN-CAPT CONTROL WHEEL POSN-CAPT ENG EPR COMMAND - L ENG EPR LIMIT - L ENG EPR LIMIT - R ENG OIL TEMP - L ENG OIL TEMP - R FL CH MODE OPER FCCL FL CH MODE OPER FCCR FL CH MODE OPER MCPA FL CH MODE OPER FCCC FLAP HANDLE POSN GEAR DISAGREE SYS 1 GEAR DISAGREE SYS 2 GMT YEAR HYD PRES - C HYD PRES - L HYD PRES - R HYD SYS LO QTY - C HYD SYS LO QTY - L HYD SYS LO QTY - R IDG OIL TEMP - L MANUFACTURER CODE MIN SPEED TMCL REQ'D NAV PERF-(RNP) RUDDER PEDAL POSN STATIC PRESSURE Renamed the BLEED DUCT PRESS - parameter to BLEED DUCT PRESS - R Renamed the parameters with names starting with FLT DIR ON to not include (0-CAPT OFF 1-CAPT ON) Changed the conversion formulas for the LATERAL ACCELERATION, LONGITUDINAL ACCEL and VERTICAL ACCELERATION parameters. The values produced by the program still have a maximum difference of 1 in the last decimal place with those in the NTSB CSV files. Added the following parameters: 5 MI RANGE SEL CAPT 10 MI RANGE SEL CAPT 160 MI RANGE SEL CAPT 5 MI RANGE SEL F/O 10 MI RANGE SEL F/O 20 MI RANGE SEL F/O 40 MI RANGE SEL F/O 80 MI RANGE SEL F/O 160 MI RANGE SEL F/O A/P CMD L ENGA FCCL A/P CMD L ENGA FCCR A/P CMD L ENGA MCPA A/P CMD L ENGA FCCC A/P CMD R ENGA FCCL A/P CMD R ENGA FCCR A/P CMD R ENGA MCPA A/P CMD R ENGA FCCC A/P ENGAGE DETENT FCCL A/P ENGAGE DETENT FCCR A/P WARNING FCCC A/P WARNING FCCL BLEED DUCT PRESS - L CONTROL COLUMN POSN-CAPT Synchro Angle CONTROL WHEEL POSN-CAPT Synchro Angle ENG EPR COMMAND - R ENG N3-ACTUAL - L ENG N3-ACTUAL - R IDG OIL TEMP - R FILTER 3 VIB - L FILTER 3 VIB - R FLAP HANDLE POSN Voltage FMC/IRU DATA SOURCE GPS ILS (MOD) MODE SEL F/O ILS (STD) MODE SEL CAPT ILS (STD) MODE SEL F/O L NAV MODE OPER MCPA L.E. SLATS ASYM L.E. SLATS EXTEND L.E. SLATS FAIL MAG/TRUE DATA CAPT MAG/TRUE STATUS CAPT MIN SPEED FCCL MIN SPEED FCCR MIN SPEED FCCC Raw ALTITUDE (1013.25mB) COARSE Raw ALTITUDE (1013.25mB) FINE Raw CONTROL COLUMN POSN-CAPT Raw CONTROL WHEEL POSN-CAPT Raw FLAP HANDLE POSN V NAV MODE OPER MCPA VHF CENTER KEYING VHF RIGHT KEYING VOR (MOD) MODE SEL CAPT For further information see Notes on Parameters for the UAL93 FDR Decoder. |
| 1.5 | Added the following
parameters: T/L RSLVR ANGLE-LEFT T/L RSLVR ANGLE-RIGHT ENG BLEED OFF - L ENG BLEED OFF - R L ENG BLEED OVHT R ENG BLEED OVHT L BLEED DUCT LEAK R BLEED DUCT LEAK APU BLEED VALVE ENG LO OIL PRESS - L ENG LO OIL PRESS - R For further information see Notes on Parameters for the UAL93 FDR Decoder. |